How to Prepare Your Pool for When It Is Not In Use

There will come a time when you can’t use your pool for some time. This could be because the weather is not right or that you are going on vacation. Just because you will not be swimming in it, however, doesn’t mean that you can leave it to its own devices. You must continue to maintain your water feature. Here are some guidelines that you should follow carefully to make certain that the structure and the water will be safe to use at a later point.

Get a Cover for the Pool

If you don’t already them, you will need to invest in pool covers Sydney. This is essentially the most important part of closing up your pool. This device is what will prevent anything unwanted from getting into your pool. This can prevent the formation of algae and can also make it easier for you to clean the water later on. Of course, it is important to carefully choose which one to place over your surface. Make sure that the covering is made of durable material, can be fastened down, and can be securely fitted over the pool. Considering just how beneficial it is, it is worth it to make an effort to find the right one.

Balance the Chemicals in the Water

Even though you will not be swimming in it, it is still important to maintain a good balance between all of the chemicals. This is what will prevent algae from forming when the pool remains unused for a while. The first thing you will need to tend to is the pH value which should be around 7.4. You should also check that alkalinity is between 80 and 120ppm. Last but not least, the calcium hardness should be maintained between 180 and 220ppm. Several days before you close the feature up, you should shock the pool. It is up to you whether you want to use a chlorine or non-chlorine shock.

Clean Out the Pool

It is imperative that you clean the water, the walls, and the bottom before you seal the feature up. Remember, debris is one of the reasons that algae forms. To avoid this, you should make sure that there is nothing floating in the water that shouldn’t be there. This means that you will have to give the structure the full treatment. Skim the surface and scrub and brush the walls and bottom. Then, make it a point to manually vacuum everything up. Once you are done with this, empty out the skimmer basket, and anything else that catches debris.

Reduce the Water Level

In most instances, you will be advised against draining all of the water. The presence of water can actually help to protect the pool when it is not in use. Nonetheless, you should lower the level a little. Just how much depends on the covering that you are placing over the water. If it is a solid one, you will only have to reduce the level by around 7 – 15cm. For mesh coverings, you should consider lowering it by about by 30 to 45cm.

This is how you can prep your swimming pool when you will not be using it for some time.